 |
 |
 |
 |
Apollo's Precision-5 is now the Precision-5 Pro!More Precision & Power - The enhanced power and exclusive features of the PRECISION-5 PRO put you in control of the most advanced TrueHVLP system for industries and applications demanding precision HVLP technology for the perfect finish. The PRECISION-5 PRO can be used for the widest range of coatings, solvent or water base, clear or pigmented as well as specialized materials: faux paints, gelcoat, latex (emulsion) and multi-spec.
Included Accessories – A $98 Value - Deluxe Spray Gun Case, Wrench (Spanner), Gun Lube, Cleaning Kit, Viscosity Cup & Blow Off Tool.
Advanced Features
Precision Pressure Control System (PCS™) controls motor speed, voltage and amperage adjusting automatically for altitude and barometric pressure assuring precise atomizing pressure anywhere.
Unparalleled Power & Efficiency Delivers 10.0 PSI sealed pressure for optimum atomization. Documented 80+% transfer efficiency and 38% savings on coatings when compared with compressed air systems.
LCD Message Center Hour Meter, Accurate Pressure to 1/10th PSI, Idling, Filter and Temperature Warning.
PowerPause™ Provide a 45 second auto-idle mode to preserve motor life and long-term reliability while permitting the highest available flow pressure. (U.S. Patent 9,599,117 B2).
QuadraClean™ Dual automotive paper filters provide advanced air filtration to keep the system running cooler and prolong motor life.
32′ (9.75 meter) Apollo-Flex™ Hose Quick lightweight alloy couplers on both ends and our exclusive Ultra-Flex™ whip hose at the spray gun end.
Handi-Hold™ Spray Gun Docking Station Store, hold or transport your spray gun, or other accessories, safely.
Package Includes:
Available Tip Sizes To Be Placed Into 7700 Gun - High solid air caps are intended to be used for spraying high viscos or thicker pigmented paints. (your choice of one tip size installed in spray gun - Select size at checkout)
- 0.5mm for spraying Clear Coats on Cars
- 0.8mm for spraying thin dyes and stains, base coat on cars
- 1.0mm for spraying base and metallics on cars, along with most solvent and waterborne finishes on wood
- 1.3mm for pigmented solvent finishes, some polyurethane.
- 1.5mm for pigmented waterborne finishes, waterborne polyurethane, latex paint on cabinets and furniture
- 1.8mm for primers, some latex paint
- 2.0mm for primers, multi fleck materials
- 2.5mm for Gelcoat, Dope
Specifications:- Turbine - 5 Stage
- Power - 10 PSI
- 130 CFM (3.68 cmm)
- Dual Air Filtration
- HVLP Only Single Spray Gun
- 110VAC 60HZ or 240VAC 50Hz
- 31 lbs/14.1 Kg
- 15 X 8.5 X 12 (38.1cm X 21.6cm X 30.48cm)
|
|
 |
 |
 |
 |
|
 |


|