 |
 |
 |
|
Fuji 8050 HVLP Air Cap, Nozzle & Needle. Fits the GXPC spray gun
Each Air Cap Set Sold Separately. Price Reflects Single Size.
- #2 - Fuji's smallest nozzle set. The #2 or 0.7mm is perfect for applying most standard stains and very thin
finishes. Excellent for shading with stains or inks and for fine
airbrush techniques.
- #3 - Smaller size nozzle set for finer
atomization. 1.0mm (.039in) Best size for some water-based products but
please check first with the manufacturer of the coating. This is our
Combo 3H used also for Spray Tanning. Excellent for shading with stains
or inks and for fine airbrush techniques. Not for Latex House Paint.
Please note* these parts will not fit the older Fuji Model SC-1. For the
SC-1 spraygun, please order 3001-3.
- #4 - This is the best size for most products
that can be sprayed. The #4 measures 1.4mm (.055in) and this is our
standard aircap set that is installed in every new Fuji spraygun. Best
for nitrocellulose lacquers, oil-based paints, varnishes and even latex
house paint (fine-finishing applications only see larger sizes). Please
note* these parts will not fit the older Fuji Model SC-1. For the SC-1
spraygun, please order 3001-4.
- #5 - Perfect for when you need faster
application. Always remember that once you step up to #5 or #6 you may
start to see some slight texture in the finish. The #5 measures 1.8mm
(.070in.). Please note* these parts will not fit the older Fuji Model
SC-1. For the SC-1 spraygun, please order 3001-5.
- #6 - The largest aircap set in the Fuji
lineup. Use this size for wall/ceilings or any large surface where fast
coverage is required. Perfect for splatter paints (multi-fleck). The #6
measures 2.2mm (.086in) Please note* these parts will not fit the older
Fuji Model SC-1. For the SC-1 spraygun, please order 3001-6.
Each Air Cap Set Sold Separately. Price Reflects Single Size.
|
|
|
 |
|
 |
|
|
|
